Table of Contents
Advertisement
Parameters:
The manager username and password is also used by the web UI.
6.7.2 IP Configuration
User can configure the IP setting and fill in the new value.
ip address
Description:
Set IP address and subnet mask.
Syntax:
ip address <ip-addr> <ip-mask>
ip default-gateway
Description:
Set the default gateway IP address.
Syntax:
ip default-gateway <ip-addr>
show ip
Description:
Show IP address, subnet mask, and the default gateway.
show info
Description:
Show basic information, including system info, MAC address, and versions.
Switch(config)# show info
Model name: WGSW-2620HP
Description: 24-Port 10/100Mbps + 2G TP/SFP Combo Managed 802.3at PoE Switch
MAC address: 00:30:4F:7C:36:BD
Firmware version: 1.00
CLI version: 1.07
802.1x: disabled
GVRP: disabled
LLDP: disabled
IGMP: enabled
LACP: enabled
User's Manual of WGSW-2620HP
161
Advertisement
Table of Contents
