Table of Contents
Advertisement
4.6.2 Static MAC Table
You can add a static MAC address that remains in the switch's address table regardless of whether the device is physically
connected to the switch. This saves the switch from having to re-learn a device's MAC address when the disconnected or
powered-off device is active on the network again. Via this interface, you can add / modify / delete a static MAC address.
Add the Static MAC Address
You can add static MAC address in the switch MAC table here.
The page includes the following fields:
Object
MAC Address:
Port num.:
VLAN ID:
Figure 4-6-2: Static MAC Addresses Interface Screenshot
Description
Enter the MAC address of the port that should permanently forward traffic,
regardless of the device network activity.
Pull down the selection menu to select the port number.
The VLAN ID for the entry.
User's Manual of WGSW-2620HP
93
Advertisement
Table of Contents
