Advertisement
10.
Refer to
Figure 30
hoses and hydraulic lines to the hydraulic pump.
Figure 30
1. Hydraulic line number 3
2. Coupler bracket
3. R-clamp
11.
Slide the 2 small hose clamps onto the small
molded hydraulic hose
31).
12.
Install the long leg of the molded hose onto the
90-degree tee in the hydraulic tank
13.
Install the short leg of the molded hose onto the
barb end of hydraulic line number 4
14.
Tighten the two small hose clamps on each end
of the molded hose.
15.
Loosely install the hydraulic line (hose) number
5 to the small 90-degree tee
for the correct locations of the
4. Hydraulic hose with fittings
5. Large hydraulic hose
6. Hydraulic pump
(Figure 24
and
Figure
(Figure
(Figure
(Figure
31).
g363520
1. Hydraulic line (hose)
31).
number 5
2. Small 90-degree tee with
barb in hydraulic tank
31).
3. Small hose clamp
15
Figure 31
4. Small molded hose
5. Hydraulic line number 4
g363507
Advertisement
