Advertisement
Figure 25
1. Large 90-degree elbow
installed in tank
2. Hydraulic line number 3
3. Machine frame
g363508
4. Coupler bracket
5. Hydraulic tank
10
Installing the Hydraulic
Hoses
Parts needed for this procedure:
1
Large hydraulic hose
1
Hydraulic hose with fittings
2
Large hose clamp
2
Small hose clamp
1
Small molded hydraulic hose
1
R-clamp
1
Bolt (5/16 x 7/8 inch)
1
Flange nut (5/16 inch)
Procedure
Note:
Make sure that nothing rubs against any hoses.
1.
Slide the 2 large hose clamps onto the large
hydraulic hose.
2.
Install the large hydraulic hose to the 90-degree
elbow installed to the side of the hydraulic pump
(Figure
26).
3.
Tighten a hose clamp around the hose and
elbow
(Figure
4.
Install the large hydraulic hose to hydraulic line
number 3
(Figure
5.
Tighten the hose clamp around the hose and
hydraulic line number 3
13
26).
26).
(Figure
26).
Advertisement
