Advertisement
Quick Links
Folding Windshield Kit
Vista Shuttle Vehicle
Model No. 08220
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
No parts required
Windshield assembly
Middle windshield support
Delta-point screw
Spacer
Hex-socket flange head bolt (M6 x 55 mm)
Locknut (M6)
Preparing the Machine
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Shut off the machine and remove the key.
© 2022—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Qty.
–
Prepare the machine.
1
1
1
Install the folding windshield.
4
4
4
Register at www.Toro.com.
Form No. 3453-346 Rev A
Installation Instructions
Use
*3453-346*
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Advertisement
Related Manuals for Toro 08220
Summary of Contents for Toro 08220
- Page 1 Form No. 3453-346 Rev A Folding Windshield Kit Vista Shuttle Vehicle Model No. 08220 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. – No parts required Prepare the machine.
- Page 2 Installing the Folding Windshield Remove the hood. At the indent in the dash, drill a hole (6 mm or 1/4 inch) as shown in Figure g384988 Figure 1 1. Drill the hole (6 mm or 1/4 inch) here.
- Page 3 Secure the middle windshield support to the opening in the dash using the delta-point screw (Figure Torque the delta-point screw to 112 N∙cm (10 in-lb). g384989 Figure 2...
- Page 4 Insert the bottom of the windshield assembly into the middle windshield support. Secure the windshield to the front canopy frame tubes using the 4 hex-socket flange head bolts (M6 x 55 mm), 4 spacers, and 4 locknuts (M6) as shown in Figure Torque the hex-socket flange head bolts (M6 x 55 mm) to 9 N∙m (80 in-lb).