Toro 08781 Operator's Manual page 12

Figure 22
1. Hydraulic line number 1
2. Hydraulic line number 2
3. Hydraulic line number 3
1. Install the existing hoses back onto the hydraulic
tank.
2. Install the hydraulic tank to the frame and secure
it with the 3 brackets previously removed and
loosened (Figure
Figure 23
1. Hydraulic tank
2. Bolt
3. Top bracket
3. Install hydraulic line number 4 to the tee fitting
assembled to the side of the valve
4. Hydraulic line number 4
5. Hydraulic line number 5
23).
4. Nut
5. Side bracket
6. Washer
(Figure
g362945
1. Small 90-degree tee with
barb in hydraulic tank
2. Hose clamp
4. Position hydraulic line number 3 into the
machine as shown in
5. Install hydraulic line number 3 to the large
90-degree elbow installed to the strainer and
hydraulic tank
g003575
24).
12
Figure 24
3. Small molded hose
4. Hydraulic line number 4
Figure 25.
(Figure 25).
g363375