Advertisement
Figure 26
1. Hydraulic line number 3
2. Hose clamp
3. Large hydraulic hose
6.
Install an R-clamp onto the large hydraulic hose
as shown in
Figure 27
Figure 27
1. Nut (3/8 inch)
2. R-clamp
g363376
4. 90-degree elbow
5. Hydraulic pump
and
Figure
30.
g003615
3. Bolt (3/8 x 3/4 inch)
4. Retainer bracket
7.
Install the R-clamp to the retainer bracket with a
bolt (5/16 x 7/8 inch) and a nut (5/16 inch); refer
to
Figure
27.
8.
Install the hydraulic hose with fittings to the
fitting on hydraulic line number 2 as shown in
Figure
28.
1. Valve
2. Fitting on hydraulic line
number 2
9.
Install the hydraulic hose with fittings to the
45-degree elbow attached to the hydraulic pump
(Figure 29
and
Note:
It will be below the hydraulic cylinder.
1. Fitting on hydraulic line
number 2
2. Hydraulic hose with fittings 4. Hydraulic pump
14
Figure 28
3. Hydraulic hose with fittings
Figure
30).
Figure 29
3. 45-degree elbow
g362948
g363377
Advertisement
