Bios Features Setup - JETWAY J-Mark J-530CF Manual

3-2 BIOS FEATURES SETUP

Select the "BIOS FEATURES SETUP" option in the CMOS SETUP UTILITY menu allows
user to change system related parameters in the displayed menu. This menu shows all of
the manufacturer's default values of this motherboard. Again, user can move the cursor
by pressing direction keys and <PgDn> of <PgUp> keys to modify the parameters.
Pressing [F1] key to display help message of the selected item.
This setup program also provide 2 convinent ways to load the default parameter data
from BIOS [F6] or CMOS [F7] area if shown data is corrupted. This provides the system
a capability to recover from any possible error.
Virus Warning
CPU Internal Cache
External Cache
Quick Power On Self Test
Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Memory Pariy Check
Typematic Rate Setting
Typematic Rate (Chars/Sec) : 6
Typematic Delay (Msec)
Security Option
PCI/VGA Palette Snoop
OS Select For DRAM > 64MB : Non-OS2
Report No FDD For WIN 95
Note: The Security Option contains "setup" and "system". The "setup" indicates that the
password setting is for CMOS only while the "system" indicates the password setting is
for both CMOS and system boot up procedure.
•
Virus Warning: This category flashes on the screen. During and after the system
boots up, any attempt to write to the boot sector or partition table of the hard disk
drive will halt the system and the following error message will appear, in the mean
time, you can run an anti-virus program to locate the problem. Default value is
Disabled
Enabled: Activates automatically when the system boots up causing a
warning message to appear when anything attempts to access the boot
sector or hard disk partition table.
ROM PCI/ISA BIOS (2A5IMJ1A)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
: Disabled Video BIOS Shadow
: Enabled C8000-CBFFF Shadow
: Enabled CC000-CFFFF Shadow
: Enabled D0000-D3FFF Shadow
: A,C,SCSI D4000-D7FFF Shadow
: Disabled D8000-DBFFF Shadow
: Enabled DC000-DFFFF Shadow
: On
: Enabled
: Disabled
: 250
: Setup
: Disabled
Esc: Quit
F1 : Help
: No
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Figure 3-3
18
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
↑↓→← : Select Item
Pu/Pd/+/-:Modify
(Shift)F2 : Color