Table of Contents
Advertisement
IDE Channel 0 Master / Channel 0 Slave
SATA Channel 1, 2, 3, 4
Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type.
specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category. If the type of hard disk drives
is not matched or listed, you can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter
the information directly from the keyboard. This information should be provided in the
documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be "None".
If the controller of HDD interface is CD-ROM, the selection shall be "None"
The settings are Auto Normal, Large, and LBA.
Access Mode
number of cylinders
Cylinder
number of heads
Head
write precomp
Precomp
Landing Zone landing zone
number of sectors
Sector
3-5
Advanced BIOS Features
Hard Disk Boot Priority
CPU Feature
Virus Warning
CPU Internal Cache
External Cache
Quick Power on Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot other Device
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
APIC Mode
MPS Version Control For OS
OS Select For DRAM > 64MB
HDD S.M.A.R.T. Capability
Small LOGO(EPA) Show
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Hard Disk Boot Priority
The selection is for you to choose the hard disk drives priorities to boot from.
Virus Warning
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Press Enter
Press Enter
Disabled
Enabled
Enabled
Enabled
Hard Disk
CDROM
Floppy
Enabled
Enabled
On
Fast
Disabled
6
250
Setup
Enabled
1.4
Non-OS2
Disabled
Enabled
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
23
Note that the
Item Help
Advertisement
Table of Contents
