Table of Contents
Advertisement
Disabled: Disable typematic rate and typematic delay programming. The system
BIOS will use default value of this 2 items and the default is controlled by
keyboard.
•
Typematic Rate (Chars/Sec):
6 : 6 characters per second
10 : 10 characters per second
15 : 15 characters per second
24 : 24 characters per second
•
Typematic Delay (Msec): When holding a key, the time between the first and
second character displayed.
250 : 250 msec
500 : 500 msec
750 : 750 msec
1000 : 1000 msec
•
Security Option: This category allows you to limit access to the system and Setup,
or just to Setup. The default value is Setup.
System:
The system will not boot and access to Setup will be denied if the correct
password is not entered at the prompt.
The system will boot, but access to Setup will be denied if the incorrect
Setup:
password is entered at the prompt.
NOTE:
To disable security, select PASSWORD SETTING at Main Menu and then you will be
asked to enter password. Do not type anything and just press <Enter>, it will disable
security. Once the security is disabled, the system will boot and you can enter Setup
freely.
•
Video BIOS Shadow: It determines whether video BIOS will be copied to RAM,
however, it is optional from chipset design. Video Shadow will increase the video
speed.
Enabled:
Video shadow is enabled
Disabled:
Video shadow is disabled
•
C8000 - CBFFF Shadow:
CC000 - CFFFF Shadow:
D0000 - D3FFF Shadow:
D4000 - D7FFF Shadow:
D8000 - DBFFF Shadow:
DC000 - DFFFF Shadow:
These categories determine whether optional ROM will be copied to RAM by 16K
byte or 32K byte per/unit and the size depends on chipset.
Enabled:
Optional shadow is enabled.
Disabled: Optional shadow is disabled.
8
: 8 characters per second
12 : 12 characters per second
20 : 20 characters per second
30 : 30 characters per second
20
Advertisement
Table of Contents
