Standard Cmos Setup; Bios Features Setup - JETWAY J9BXAS-7A User Manual

Pci/ agp mainboard for pentium ii/ iii or socket 370

Hide thumbs

Table Of Contents

Table of Contents

STANDARD CMOS SETUP (Figure 3-1) allows user to configure system setting such as current

date and time, type of hard disk drive installed in the system, floppy drive type, and the type of

display monitor. Memory size is auto-detected by the BIOS and displayed for your reference.

When a field is highlighted (direction keys to move cursor and <Enter> key to select), the entries in

the field will be changed by pressing <PgDn> or <PgUp> keys or user can enter new data directly

from the keyboard.

Date (mm:dd:yy) : Wed, Sep, 10 1997

Time (hh:mm:ss) : 10 : 33 : 52

HARD DISKS

Primary Master

Primary Slave

Secondary Master : Auto

Secondary Slave

Drive A : 1.4M , 3.25 in.

Drive B : None

Video

Halt On : All Errors

Esc : Quit

: Help

NOTE:

If hard disk Primary Master/Slave and Secondary Master/Slave were used Auto, than the hard

disk size and model will be auto-detect on display during POST.

NOTE:

The "Halt On:" field is to determine when to halt the system by the BIOS is error occurred

during POST.

3-2

BIOS FEATURES SETUP

Select the "BIOS FEATURES SETUP" option in the CMOS SETUP UTILITY menu allows user to

change system related parameters in the displayed menu.

manufacturer's default values of this motherboard. Again, user can move the cursor by pressing

direction keys and <PgDn> of <PgUp> keys to modify the parameters. Pressing [F1] key to

display help message of the selected item.

This setup program also provide 2 convenient ways to load the default parameter data from BIOS

[F6] or CMOS [F7] area if shown data is corrupted. This provides the system a capability to

recover from any possible error.

ROM PCI/ISA BIOS (2A69KJ1L)