Siemens SIMATIC ET 200SP Operating Instructions Manual page 84

Technical specifications
13.1 Standards and approvals
ATEX approval
In accordance with EN 60079‑15 (Electrical apparatus for potentially explosive atmospheres;
Type of protection "n") and EN 60079‑0 (Electrical apparatus for potentially explosive gas
atmospheres - Part 0: General Requirements)
OR
IECEx approval
According to IEC 60079-15 (Explosive atmospheres - Part 15: Equipment protection by type
of protection "n") and IEC 60079‑0 (Explosive atmospheres - Part 0: Equipment - General
requirements)
RCM (C-Tick) Declaration of conformity for Australia/New Zealand
CPU 1515SP PC2 meets the requirements of the standard EN 61000-6-4:2007 + A1:2011.
Korea Certificate KCC-REM-S49-ET200SP
Note that this device corresponds to limit class A in terms of the emission of radio frequency
interference. This device can be used in all areas, except residential areas.
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라
며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
IEC 61131
The CPU 1515SP PC2 with the S7-1500 Software Controller CPU 1505SP (F/T/TF) fulfills the
requirements and criteria of the IEC 61131‑2 standard (programmable logic controllers, Part 2:
Equipment requirements and tests).
PROFINET standard
CPU 1515SP PC2 is based on standard IEC 61158 Type 10.
PROFIBUS standard
CPU 1515SP PC2 is based on standard IEC 61158 Type 3.
82
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 03/2023, A5E42603425-AC