Siemens SIMATIC ET 200SP Operating Instructions Manual page 83

cULus HAZ. LOC. approval
Underwriters Laboratories Inc., complying with
• UL 508 (Industrial Control Equipment)
• CSA C22.2 No. 142 (Process Control Equipment)
• ANSI/ISA 12.12.01
• CSA C22.2 No. 213 (Hazardous Location)
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
Installation Instructions for cULus haz.loc.
• WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is known to
be non-hazardous.
• WARNING - Explosion Hazard - Substitution of components may impair suitability for Class I,
Division 2 or Zone 2.
• This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class I, Zone 2, Group
IIC; or non-hazardous locations.
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING PROPERTIES OF
MATERIALS USED IN THE RELAY.
FM approval
Factory Mutual Research (FM) according to
Approval Standard Class Number 3611, 3600, 3810
(ANSI/ISA 82.02.01)
CSA C22.2 No. 213
CSA C22.2 No. 61010-1
APPROVED for use in Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
Installation Instructions for FM
• WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is known to
be non-hazardous.
• WARNING - Explosion Hazard - Substitution of components may impair suitability for Class I,
Division 2 or Zone 2.
• This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class I, Zone 2, Group
IIC; or non-hazardous locations.
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING PROPERTIES OF
MATERIALS USED IN THE RELAYS.
OR
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 03/2023, A5E42603425-AC
Technical specifications
13.1 Standards and approvals
81