Functions; Monitoring Functions; Requirements - Siemens SIMATIC ET 200SP Operating Instructions Manual

Functions

10.1

Monitoring functions

10.1.1

Requirements

Introduction
The CPU 1515SP PC2 has monitoring functions that you can use with the corresponding
monitoring software.
The following display, monitoring and control functions are available:
• Temperature monitoring
• Monitoring the CFast card with the S.M.A.R.T. function
• Operating hours counter (information on the total runtime)
• HW LED status display (RUN/STOP, ERROR, MAINT)
Monitoring software
• SIMATIC IPC DiagBase
The SIMATIC DiagBase software is included in the scope of delivery of the CPU 1515SP PC2.
Use the DiagBase Management Explorer application to obtain a clearer overview for
monitoring. The DiagBase Alarm Manager notifies you of individual alarms.
Note
For additional information, refer to the online help for the SIMATIC IPC DiagBase software.
• SIMATIC IPC DiagMonitor
The SIMATIC DiagMonitor software is provided on a CD. You can find the order number of the
license in the section Accessories/Spare parts (Page 113).
Potential system failures are detected and reported in good time with the diagnostics and
alerting software. The software is also used for remote diagnostics.
The software contains:
– The software for the stations to be monitored
– A library for creating your own applications
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 03/2023, A5E42603425-AC
10
59