Cancelling The Washing Programme; Cancelling The Drying Programme; Unloading The Laundry; Put The Appliance Into Standby Mode - Siemens XQG120 User Manual And Installation Instructions

Table of Contents

Advertisement

en Childproof lock
13.10 Cancelling the washing
programme
Press Cancel .
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high, start
the Spin programme or select
a suitable programme for drain-
ing.
→ "Programmes", Page 29
Remove the laundry.
3.
→ "Unloading the laundry",
Page 40
13.11 Cancelling the drying
programme
Press Cancel .
The cooling process starts auto-
matically after approx. 30 seconds
and cools down the laundry for a
few minutes while the drum is ro-
tating. The door is then automatic-
ally unlocked.
13.12 Unloading the laundry
Open the door.
1.
→ "Opening the door", Page 38
Remove the laundry from the
2.
drum.
13.13 Put the appliance into
standby mode
Press ⁠ .
1.
Turn off the tap.
2.
40
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.
14 Childproof lock
Secure your appliance against being
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press on
⁠ to activate the child-
1.
proof lock.
Press
⁠   Child lock.
2.
a The display shows a message.
a The control elements are locked.
a The childproof lock also remains
activated when the appliance is in
standby mode and in the event of
a power cut.
14.2 Deactivating the child-
proof lock
Requirement: To deactivate the
childproof lock, the appliance must
be switched on.
Press on the display.
1.
Press and hold
2.
3 seconds.
for approx.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ws74d8a10w

Table of Contents