Table of Contents
Advertisement
en Installation and connection
Remove the foam parts on the un-
2.
derside.
Do not dispose of the foam parts.
Use the foam parts when trans-
porting the appliance in the future.
Insert the cover on the underside
3.
into the openings until it locks into
place.
If required, secure the cover on the
underside with screws.
Note: To insert the foam parts for
transportation into the appliance, per-
form these steps again in the reverse
order.
14
4.5 Removing the transit
bolts
The appliance is secured for trans-
portation using transit bolts on the
rear of the appliance.
Note: Keep the transit bolt screws
and the sleeves in a safe place for fu-
ture transport.
→ "Inserting the transit bolts",
Page 61
Requirement: The foam parts are re-
moved.
→ "Removing foam parts", Page 13
Pull the hoses out of the holders.
1.
Unscrew
and remove
2.
screws for the 4 transit bolts with a
WAF 13 wrench.
all the
Advertisement
Table of Contents
