Soaking Laundry; Adding Laundry; Cancelling The Washing Programme; Cancelling The Drying Programme - Siemens WNE4A2UPIN User Manual And Installation Instructions

Table of Contents

Advertisement

Notes
If you do not remove the laundry
¡
once the programme has ended,
the crease-reduction function starts
after 15 minutes and takes approx.
30 minutes. The display shows 0:
00, ⁠   ⁠   ⁠ , ⁠   and End alternately,
and
appears.
Press any button on the display to
cancel the crease-reduction pro-
gramme and to remove the laun-
dry.
If "Hot" appears, the appliance
¡
cools the laundry.
When "Hot" goes out, the laundry
has cooled down.
13.7 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press
Reload.
To resume the programme, after
3.
the desired soaking time, press
⁠   Start/Reload.
13.8 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press
⁠   Start/Reload.
1.
During the washing cycle, the ap-
pliance pauses.
During the drying cycle, the appli-
ance checks whether it is possible
to add laundry.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 22
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
5.
13.9 Cancelling the washing
Press
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
– If the water level is high, start
Remove the laundry.
3.
→ "Unloading the laundry",
Page 32
13.10 Cancelling the drying
⁠   Start/
Turn the programme selector to
set any other programme.
The door lock opens automatically
a
after a cooling period of a few
minutes.
13.11 Resuming the pro-
Requirements
Rinse Stop is activated.
¡
The last rinse cycle of the set pro-
¡
gramme has ended and the laun-
dry is in the rinsing water.
Set the Spin  
1.
programme for draining the water.
→ "Programmes", Page 25
Press
2.
Basic operation en
⁠   Start/Reload.
programme
⁠   Start/Reload.
the Rinse  
programme.
the Spin  
programme or se-
lect a suitable programme for
draining.
→ "Programmes", Page 25
programme
gramme when the pro-
gramme status is Rinse
Hold
programme or a
⁠   Start/Reload.
31

Advertisement

Table of Contents
loading

Table of Contents