Table of Contents
Advertisement
en Troubleshooting
Fault
The drying time is too
long.
Creasing.
The appliance is not
working.
The programme does
not start.
The door cannot
be opened.
52
Cause and troubleshooting
Run the Drum Care programme without any laun-
▶
dry or detergent.
The load is too large.
The laundry lies in the drum for too long after drying.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable programme for the type of fabric.
Set the suitable programme for the type of fabric.
▶
Easy-Care fabrics are dried for too long.
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
has not been pressed.
Press
.
▶
Door is not closed.
Close the door.
▶
Childproof lock is activated.
Deactivate childproof lock.
▶
→ "Deactivating the childproof lock", Page 40
Finish in is activated.
Check whether
▶
→ "Buttons", Page 25
Laundry is caught in the door.
Remove any trapped laundry.
▶
The detergent drawer has not been pushed in fully.
Push in the detergent drawer.
▶
The temperature is too high.
Wait until the temperature has dropped.
▶
Cancel the programme.
▶
→ "Cancelling the washing programme", Page 40
Water level is too high.
Select a suitable programme for draining.
▶
→ "Programmes", Page 29
Finish in is activated.
Advertisement
Table of Contents
