Table of Contents
Advertisement
8 Buttons
With the More Programs button, you can open the sub-menu for additional
programme settings. The additional programme settings are listed in the over-
view for the buttons.
The selection of programme settings depends on the programme that is set.
Button
(mains
switch)
Temperature Cold - 90
Spin Speed off - 1400
Pause/Reload ¡ Pause
Cancel
Finish in
Speed
Selection
¡ Switch on
¡ Standby mode
Start
¡ Reload
Cancel
Open the menu
Up to 24 hours
¡ Activate
¡ Deactivate
Description
Switch on the appliance or put it in
standby mode.
Adjust the temperature.
Set temperature in °C.
Adjust the spin speed or deactivate
the spin cycle.
Set spin speed in rpm.
If off is selected, the water is drained
and the spin cycle is deactivated. The
laundry stays wet inside the drum.
Start programme.
→ "Starting the programme",
Page 39
Pause the programme or add laundry.
→ "Adding laundry", Page 39
Note: Adding laundry depends on the
programme status.
Cancel the programme.
→ "Cancelling the washing pro-
gramme", Page 40
→ "Cancelling the drying programme",
Page 40
Open the menu for additional settings.
Set the programme end time.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Activate or deactivate a shorter pro-
gramme duration.
Note: Energy consumption increases.
The washing result is not affected by
this.
Buttons en
25
Advertisement
Table of Contents
