Advertisement

Instruction Manual and Installation Instructions
en
Wash & Dry

Advertisement

Table of Contents
loading

Summary of Contents for Siemens WDI1442

  • Page 1 Instruction Manual and Installation Instructions Wash & Dry...
  • Page 2: Table Of Contents

    Inhaltsverzeichnis General safety instructions ....Gebrauchsanleitung Your New washer dryer ..... Description of the washer dryer .
  • Page 3: General Safety Instructions

    Retain all documentation for subsequent use or for the next owner of the appliance. Further information and a selection of our products can be found on our Internet page: http://www.siemens international.com General safety instructions This washer dryer meets the relevant safety require ments.
  • Page 4 Do not use the washer dryer if: - the laundry has been treated with a solvent or has been colour treated (e.g. stain remover, petroleum ether). - the laundry contains dust, e.g. coal dust or flour - the laundry contains foam/rubber - the laundry contains traces of hairspray, nail var nish remover or similar substances.
  • Page 5: Your New Washer Dryer

    Your New washer dryer Control panel Display panel Option lights W start, X end, B spin determine the display's Indicates the settings which have been selected (e.g. spin speed, time delay) content. as well as programme progress and r dry selected for drying the programme state.
  • Page 6: Description Of The Washer Dryer

    Description of the washer dryer Our washer dryer allows the following programmes to Operation and be set: special features - wash only - dry only - wash+dry The complete wash+dry programme shifts automatically from the wash cycle to the dry cycle without further intervention.
  • Page 7: Preparing And Sorting The Laundry

    If the washer dryer is in the washing cycle, the ÊÊ symbol appears in the Q wash display. If the washer dryer is in the drying cycle, the ÊÊ symbol appears in the r drying display. Preparing and sorting the laundry Warning Preparing the Loose debris (e.g.
  • Page 8 Sorting the laundry for washing Only wash laundry that is labelled with the following Sorting washing according care symbols: to the instructions on the care labels Cottons 90 C c b a Coloureds 60 C, 40 C, 30 C h g f Easy care 60 C, 40 C, 30 C l g k f Hand washable and machine washable silk and...
  • Page 9 Warning Sorting the laundry for drying Do not they may crease. high energy consump tion. Maximum laundry loads for drying...
  • Page 10: Detergents And Cleaning Products

    Detergents and cleaning products d Risk of poisoning! Dosing detergent Keep detergents and cleaning products out of the reach of children. Dose detergent according to q the water hardness. You can find out the water hardness from your water utility company. q the specifications of the detergent manufacturer.
  • Page 11 Liquid detergents and start time delay Start time delay, page 19. With time delay selection use a dosage container for liquid detergents, e.g. a ball, otherwise the liquid de tergent will run slowly out of the soap dispenser and congeal. Take dosage container out of the drum at the end of the programme.
  • Page 12: First Wash

    First wash The washer dryer was tested before leaving the facto ry. To remove any residual test water, wash the first time without any laundry. q Check that the transport protection devices and cross pieces have been removed from the back of the washer dryer.
  • Page 13: Programmes And Functions

    Programmes and functions The programmes are set using the programme Programme selector. This can be turned in either direction. The selector programme selector must not be set to intermediate positions between the indicated programmes. Æ cotton 30, 40, 60, 90 C Washing Intensive washing programmes for hard wearing programmes...
  • Page 14 q silk 30 C For delicate, washable textiles, e.g. silk, satin, synthetic materials or blended fabrics (e.g. curtains). Delicates cycle at 30 C for hand and machine washable silk. i We do not recommend washing these textiles with other rougher textiles. Reduced spin speed Maximum load: 2.0 kg wool...
  • Page 15 Automatic drying Combination of washing and drying programmes Dry Y Delicate drying Aut1 Aut2 Displays in the case of incorrect loads Aut1 Aut2...
  • Page 16 Time-controlled drying The drying duration is the drying time you have set. Set the drying time using the Y dry button, check the type of fabric, page 21. Reduce the drying temperature using the Z delicate drying button. Rinse+Spin K+B Special For an additional rinse cycle turn the programme programmes...
  • Page 17 Soaking A easy care 30 M Start m off To end the soaking programme: do not Dyeing d Laundry which is washed in the washer dryer after a dyeing programme may discolour as dye deposits may be left in the machine.
  • Page 18 Bleaching Only use this washer dryer for bleaching, if there is no cover on dispenser 4 marked Pumping To pump out rinsing water after without final spin" (spin speed set to 000), page 21. q Turn the programme selector to b+B empty+spin.
  • Page 19 Press this button to start the selected programme. Start M button The M Start LED is constantly on from the start of the programme until the end. Press the M Start button while the programme is Pausing the programme running, and keep it pressed until STOP appears in the display (approx.
  • Page 20 Changing the start time Press the delay W button repeatedly until the required setting time is displayed. Press the delay W button repeatedly until 0:00 Cancelling the start time appears in the display. The delay W LED goes out. When the button is pressed again, the upward time count begins again from 0:00.
  • Page 21 Guide values for Drying times 1.5 kg 2.5 kg Delicate drying u button dry r Spin B button 000 rpm: from 600 to 1400 rpm: cotton and coloured from 600 to 900 rpm: synthetics, delicates and woollens spin B Resetting...
  • Page 22 i Drying times depend on the spin speed: the higher the speed the lower the drying time and, conse quently, the lower the power consumption. Choo se the highest spin speed compatible with the type of laundry. The automatic unbalanced load detection system Unbalanced load detection system turns round the laundry several times to ensure even...
  • Page 23: Washing And Drying

    Washing and drying This washer dryer allows - wash only - dry only - wash+dry programmes to be set. In the wash+dry programmes, the cycle shifts auto matically from washing to drying without having to touch the controls to continue the cycle after washing. q Press the door h button to open the door.
  • Page 24 Wash only Æ cotton Start M Pausing the washing programme Start M STOP Start M Start M Start M Stopping the washing programme 0000 Changing the washing programme STOP ---. Start M Selecting a new programme...
  • Page 25 i The tap must remain open during the drying cycle, Dry only as cold water is needed. i The maximum permitted load for drying is 2.5 kg. i For hand washed items select a separate spin cycle. q Set the programme selector to dry Y. Setting a drying programme q Press the dry Y button repeatedly until the...
  • Page 26 q Press the Start M button for approx. 3 seconds. Changing the drying programme The display alternates between STOP and ---. The X end LED flashes. q Press the dry Y button repeatedly until the required drying time is set. q Press the delicate drying u button to set low heat if desired, page 21.
  • Page 27 Changing the washing q Turn the programme selector. Select the new programme programm. The display alternates between STOP and ---. The Start/Stop M LED flashes. q Press the dry Y button repeatedly until the required drying time is set. q Press the delicate drying u button if desired, page 21.
  • Page 28: End Of Programme

    End of programme The washing and drying programmes finish automatically. End appears in the display, and the X end LED lights up. q Turn the programme selector to m off. q Remove the washing from the drum. q Leave the door open to allow the inside of the washer dryer to dry out.
  • Page 29: Cleaning And Servicing The Washer Dryer

    Cleaning and servicing the washer dryer d Risk of electric shock! First, always disconnect the appliance from the power supply. Never clean the washer dryer with a water jet. d Risk of explosion! Never clean the washer dryer with solvents. Warning Use only mild detergents to clean the washer dryer.
  • Page 30 Detergent has not been completely pumped away. Detergent pump The pump may be blocked by foreign bodies or lint. d Risk of scalding! Allow hot detergent to cool. Keep children and pets away from the washer dryer. q Set the programme selector to m off. Opening the service flap q Using a coin, turn the plastic covers in an anti clockwise direction.
  • Page 31 If no water or insufficient water is running into the Filter in the water washer dryer: inlet hose First, reduce the water pressure in the inlet hose: q Turn off the tap. q Switch off the washer dryer. q Remove the plug from the socket. q Remove the hose from the tap.
  • Page 32: What To Do If

    What to do if ... d Risk of electric shock! Repairs must only be carried out by customer services or authorised technicians. If repairs are needed, or if you cannot repair a fault yourself with the help of the following table: q Set the programme selector to m off.
  • Page 33 Fault Possible cause Remedial action empty+spin Start M Start M Start M...
  • Page 34 Fault Possible cause Remedial action...
  • Page 35 Fault Possible cause Remedial action Grey residues on the Soiling caused by ointment, grease Use maximum permissible detergent washing. or oil. amount and temperature for the next washing cycle; see the care label. Start M button pressed Programme terminated Press the button again to restart unexpectedly.
  • Page 36: Customer Service

    Customer service Before you call customer service, please check whe ther you can eliminate the fault yourself, from page 32 onwards. A technician who is called out to give advice will char ge you, even if the appliance is still under guarantee. You can find your nearest customer service in the enclosed address list.
  • Page 37: Consumption Data

    Consumption data Washing Washing and drying Automatic washing/drying process Drying...
  • Page 38: Installing, Connecting And Transporting The Washer Dryer

    Installing, connecting and transporting the washer dryer d Risk of injury! Safety information Standard accessories...
  • Page 39 On the back of the washer dryer: - Water drain hose. - Water inlet hose - Mains cable with plug. Moisture in the drum is due to the final inspection which every washer dryer undergoes before it leaves the factory. Spirit level for levelling the washer dryer.
  • Page 40 The washer dryer can be adjusted to various working heights using the hight adjustment frame*. q Fix the feet of the washer dryer in place using holding brackets**. If the washer dryer is to be positioned on the floor above a wooden beam ceiling: q Position washer dryer in a corner wherever possible.
  • Page 41: Water Connection

    To prevent leaks or water damage, it is essential to Water connection Caution min. 10 mm After connecting the water inlet hose: Aquasecure extension hose WZ 10130...
  • Page 42 Water drainage Caution Do not bend or pull the water drainage hose. Height difference between the placement area and drainage point: max. 90 cm, min. 50 cm. Drainage into a siphon: q Secure the connection point with a hose band clip of 24-40 mm diameter (from specialist stores).
  • Page 43 Caution: Electrical The washer dryer must be connected correctly to an connection A.C. contactor socket. The mains voltage must comply with the voltage infor mation given on the identification plate. The connected load and the necessary fusing are shown on the identification plate. Ensure that: - the plug and the socket are compatible.
  • Page 44: Index

    Index...
  • Page 48 WDI1442 9000284193 0807 en 19 590 1715 00...

Table of Contents