Table of Contents
Advertisement
en Home Connect
16.5 Resetting the appliance
network settings
Press
.
1.
Press
Remote start.
2.
Press Network reset .
3.
Press Continue .
4.
a The network settings are reset.
16.6 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
¡ The appliance door is opened.
Remote start is pressed.
¡
¡ Following a power cut.
Activating remote start
Requirements
¡ The appliance is connected to your
home WiFi network.
¡ The appliance is connected to the
Home Connect app.
¡ A programme is selected.
¡ The appliance door is closed.
¡ The detergent drawer has been
pushed in.
Press
.
1.
Press
Remote start.
2.
Press
.
3.
a Remote start appears and the
appliance is enabled for remote
start via the Home Connect app.
Deactivating remote start
Note: You can deactivate remote
start on the appliance or in the
Home Connect app.
Press
.
1.
Press
Remote start.
2.
a Remote start goes out.
44
16.7 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Advertisement
Table of Contents
