Table of Contents
Advertisement
en Cleaning and servicing
Put the appliance into standby
2.
mode.
→ "Put the appliance into standby
mode", Page 40
Disconnect the appliance's mains
3.
plug from the power supply.
Open and remove the service flap.
4.
1
Slide a sufficiently large container
5.
under the opening.
Take the drain hose out of the
6.
holder.
48
2
1
7.
CAUTION - Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
Do not touch the hot detergent
▶
solution.
To allow the detergent solution to
flow out into the container, remove
the sealing cap.
Firmly press on the sealing cap.
8.
Insert the drain hose into the
9.
holder.
Advertisement
Table of Contents
