Cancelling The Washing Programme; Cancelling The Drying Programme; Unloading The Laundry; Put The Appliance Into Standby Mode - Siemens WN54C2A0EU User Manual And Installation Instructions

Table of Contents

Advertisement

en Childproof lock
During the drying cycle, the appli-
ance checks whether it is possible
to add laundry.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 23
Open the door.
2.
→ "Opening the door", Page 33
Add or remove laundry.
3.
Close the door.
4.
Press
.
5.
13.10 Cancelling the washing
programme
Press
.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
⁠   Rinse programme.
– If the water level is high, start
the
⁠   Spin programme or se-
lect a suitable programme for
draining.
→ "Programmes", Page 27
Remove the laundry.
3.
→ "Unloading the laundry",
Page 34
13.11 Cancelling the drying
programme
Press
.
The cooling process starts auto-
matically after approx. 30 seconds
and cools down the laundry for a
few minutes while the drum is ro-
tating. The door is then automatic-
ally unlocked.
34
13.12 Unloading the laundry
Open the door.
1.
→ "Opening the door", Page 33
Remove the laundry from the
2.
drum.
13.13 Put the appliance into
standby mode
Press .
1.
Wipe the rubber gasket dry and re-
2.
move any foreign objects.
Leave the appliance door and de-
3.
tergent drawer open so that resid-
ual water can evaporate.

Childproof lock

14 Childproof lock
Secure your appliance against being
Childproof lock
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold Child Lock 3 sec.
for approx. 3 seconds.
The display shows
a
The control elements are locked.
a
The childproof lock also remains
a
activated when the appliance is in
standby mode and in the event of
a power cut.
.

Advertisement

Table of Contents
loading

Table of Contents