Table of Contents
Advertisement
4)
Press the <执行> button.
5)
Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
6)
Press qw to switch [USER].
7)
Press as to select the button item to set.
f When [INPUT SELECT BUTTON] is selected, press the <执行> button, and then press as to select the
button to set.
[POWER BUTTON]
[INPUT SELECT BUTTON]
[MENU BUTTON]
[LENS BUTTON]
[AUTO SETUP BUTTON]
[SHUTTER BUTTON]
[ON SCREEN BUTTON]
[OTHER BUTTON]
8)
Press qw to switch the item.
[ENABLE]
[DISABLE]
f The following items can be selected only when [RGB1/2 BUTTON] of [INPUT SELECT BUTTON] is
selected.
[TOGGLE]
[RGB1]
[RGB2]
[DISABLE]
f When [INPUT SELECT BUTTON] is selected in Step 7), once the switching of the item is completed, press
the <菜单> button to return to the [CONTROL PANEL] screen or the [REMOTE CONTROL] screen.
9)
Press as to select [APPLY], and press the <执行> button.
f The confirmation screen is displayed.
10) Press qw to select [OK], and press the <执行> button.
Note
f When a button operation is performed on the device set to [DISABLE], the [CONTROL DEVICE PASSWORD] screen is displayed.
Enter the control device password.
f The [CONTROL DEVICE PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.
f If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot
enter standby).
f When the setting has completed, the menu screen will disappear. To operate continuously, press the <菜单> button to display the main
menu.
f Even when button operations on the remote control are disabled, the operation of the <ID 设定> button on the remote control is enabled.
[CONTROL DEVICE PASSWORD CHANGE]
The control device password can be changed.
1)
Press as to select [CONTROL DEVICE PASSWORD CHANGE].
2)
Press the <执行> button.
f The [CONTROL DEVICE PASSWORD CHANGE] screen is displayed.
3)
Press asqw to select the text, and press the <执行> button to enter the text.
4)
Press asqw to select [OK], and press the <执行> button.
f To cancel, select [CANCEL].
148 - ENGLISH
Chapter 4 Settings — [SECURITY] menu
[CONTROL PANEL]
Power standby <v> button, power on <b> button
<RGB1> button, <RGB2> button, <DVI-D>
button, <HDMI> button, <DIGITAL LINK> button,
<SDI> button
<菜单> button
<镜头> button
<自动设置> button
<快门> button
—
asqw, <执行> button
Enables button operations.
Disables button operations.
Switches between [RGB1] and [RGB2] when the button is operated.
Fixes to [RGB1].
Fixes to [RGB2].
Disables button operations.
Buttons that can be set
[REMOTE CONTROL]
<RGB1/2> button, <DVI-D> button, <HDMI>
button, <DIGITAL LINK> button, <SDI> button
Lens buttons (<聚焦>, <变焦>, <移位>)
<屏幕显示> button
Buttons not listed above
Advertisement
Table of Contents
