Table of Contents
Advertisement
Specifications
The specifications of the projector are as follows.
Power supply
Power consumption
Power consumption (during
standby)
Size
DLP chip
Display system
Number of pixels 2 304 000 pixels (1 920 x 1 200 dots)
Electric zoom
Lens
*1
Electric focus
Light source
Light output
*2
Center to corner zone ratio
*3
Contrast ratio
*3
Projected image size
*4
Image aspect ratio
Projection method
Power cord length
Outer case
Outer color
Width
Height
Dimensions
Depth
Weight
Noise level
*3
Laser Class
Operating
environment
temperature
Operating
*6
environment
Operating
environment
humidity
Power supply
Operating range
Remote
control
Weight
Dimensions
*1 The lens for PT-FRZ120CL is sold separately.
*2 Value is for the supplied standard zoom lens. The value varies depending on the lens.
*3 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
*4 When the lens ET-DLE055C is used, the maximum size is 5.08 m (200"). When the lens ET-DLE035C is used, the maximum size is 2.54 m (100")
to 8.89 m (350").
*5 Average value. Weight varies for each product.
*6 When using the projector at an altitude lower than 2 700 m (8 858') above sea level, and the operating environment temperature becomes 30 °C
(86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2 700 m (8 858') and
4 200 m (13 780'), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may be reduced to protect the
projector.
Chapter 7 Appendix — Specifications
100 V - 240 V ~ (100 V - 240 V alternating current), 50 Hz/60 Hz
1 100 W (11 A - 4.5 A)
When [STANDBY MODE] is set to [ECO]: Approx. 0.5 W
When [STANDBY MODE] is set to [NORMAL]: Approx. 7 W
When the [QUICK STARTUP] function is enabled: Approx. 100 W
17 mm (0.67") (aspect ratio 16:10)
DLP chip x 1, DLP projection system
1.7 to 2.4:1
F = 1.7 to 1.9
f = 25.6 mm to 35.7 mm
Laser light source, 2 sets
12 000 lm
*3
(When [OPERATING MODE] in [OPERATION SETTING] is set to [NORMAL])
90 %
10 000:1 (when [DYNAMIC CONTRAST] is set to [3])
1.27 m (50") to 15.24 m (600")
16:10
[FRONT]/[FLOOR], [FRONT]/[CEILING], [REAR]/[FLOOR], [REAR]/[CEILING]
3.0 m (118-1/8")
Molded plastic
Black
498 mm (19-19/32")
200 mm (7-7/8") (with legs at shortest position)
PT-FRZ120C
PT-FRZ120CL
PT-FRZ120C
PT-FRZ120CL
44 dB
41 dB
38 dB
Class 3R (GB 7247.1-2012)
0 °C (32 °F) to 45 °C (113 °F)
10 % to 80 % (no condensation)
DC 3 V (AAA/R03/LR03 battery x 2)
Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
102 ] (3.6 ozs.) (including batteries)
Width: 48 mm (1-7/8"), Height: 145 mm (5-23/32"), Depth: 27 mm (1-1/16")
581 mm (22-7/8") (including standard zoom lens)
538 mm (21-3/16") (excluding the Lens Mount Cover
and optional lens)
Approx. 23.6 k] (51.9 lbs.)
(including standard zoom
*5
lens)
Approx. 22.8 k] (50.2 lbs.)
(excluding the Lens Mount
*5
Cover and optional lens)
When [OPERATING MODE] in [OPERATION
SETTING] is set to [NORMAL]
When [OPERATING MODE] in [OPERATION
SETTING] is set to [QUIET1]
When [OPERATING MODE] in [OPERATION
SETTING] is set to [QUIET2]
ENGLISH - 207
Advertisement
Table of Contents
