Table of Contents
Advertisement
8)
Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
[DISABLE]
Note
f The backup function is enabled when [BACKUP INPUT MODE] is set to anything other than [OFF] and same signal is input to the primary
input and the secondary input.
f To switch to the backup input signal using the backup function, make sure that the following three conditions are satisfied to be ready to use
the function.
g Set [BACKUP INPUT MODE] to a combination of the SDI input and DVI-D input or the SDI input and HDMI input.
g Input the same signal to the primary and secondary inputs.
g Display the image of the primary input or secondary input.
f If the input is switched to other than the primary or secondary input while the backup function is ready for use, the state of readiness to
use the backup function is canceled. To switch to the backup input signal using the backup function again, switch to the primary input or
secondary input.
f When [BACKUP INPUT MODE] is set to anything other than [OFF], the combination of that input is displayed in [PRIMARY INPUT] and
[SECONDARY INPUT] of the [BACKUP INPUT SETTING] screen.
f [BACKUP INPUT STATUS] is displayed in the input guide (x page 111) and the [STATUS] screen (x pages 69, 137) when [BACKUP
INPUT MODE] is set to anything other than [OFF].
When the signal can be switched to the backup input signal using the backup function, [ACTIVE] is displayed in [BACKUP INPUT STATUS].
When it is not possible, [INACTIVE] is displayed instead.
The secondary input will be the backup input when [BACKUP INPUT STATUS] is displaying [ACTIVE] while the image from the primary
input is displayed.
The primary input will be the backup input when [BACKUP INPUT STATUS] is displaying [ACTIVE] while the image from the secondary
input is displayed.
f When the combination of the input for [BACKUP INPUT MODE] is the SDI input and DVI-D input or the SDI input and HDMI input, the input
switches seamlessly if the input is switched between the primary input and the secondary input while the signal of the backup input can be
switched.
f When [AUTOMATIC SWITCHING] is set to [ENABLE], and [BACKUP INPUT STATUS] shows [ACTIVE], the signal is switched to the
backup input if a disruption occurs in the input signal.
f When [AUTOMATIC SWITCHING] is set to [ENABLE], the indication in [BACKUP INPUT STATUS] will change to [INACTIVE] if the input
signal is disrupted and automatically switches to the backup input. In this case, it is not possible to switch to the backup input signal until the
original input signal is restored. If the input has switched to the backup input automatically, it is possible to switch to the backup input signal
when the original signal has been restored. In this case, the current input is maintained.
f The primary input setting values are applied to image adjustment values such as the [PICTURE] menu → [PICTURE MODE], [GAMMA],
and [COLOR TEMPERATURE].
f When the combination of inputs in [BACKUP INPUT MODE] is the SDI input and DVI-D input or the SDI input and HDMI input, the backup
function is enabled only in the following combination of signals.
Primary input
HD-SDI 720/60p YP
P
4:2:2
B
R
HD-SDI 720/50p YP
P
4:2:2
B
R
3G-SDI 1080/60i RGB
3G-SDI 1080/50i RGB
3G-SDI 1080/24p RGB
3G-SDI 1080/25p RGB
3G-SDI 1080/30p RGB
3G-SDI 1080/60p YP
P
4:2:2
B
R
3G-SDI 1080/50p YP
P
4:2:2
B
R
Using the DVI-D input and HDMI input
1)
Press as to select [BACKUP INPUT SETTING].
2)
Press the <执行> button.
f The [BACKUP INPUT SETTING] screen is displayed.
3)
Press as to select [BACKUP INPUT MODE].
4)
Press the <执行> button.
f The [BACKUP INPUT MODE] screen is displayed.
5)
Press as to select the combination of the DVI-D input and HDMI input and press the <执行> button.
Chapter 4 Settings — [DISPLAY OPTION] menu
Switches to the secondary input (primary input) automatically when the input signal for primary input
(secondary input) is disrupted.
Disables the automatic input switching function.
[SDI]
Secondary input
[DVI-D]/[HDMI]
720/60p YP
P
4:4:4
B
R
720/50p YP
P
4:4:4
B
R
1080/60i RGB
1080/50i RGB
1080/24p RGB
1080/25p RGB
1080/30p RGB
1080/60p YP
P
4:4:4
B
R
1080/50p YP
P
4:4:4
B
R
ENGLISH - 103
Advertisement
Table of Contents
