Table of Contents
Advertisement
Note
f The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] of [EDID STATUS].
f Setting of the resolution and the vertical scanning frequency may be necessary on the computer or video device in use.
f The computer, video device, or projector in use may require the power to be turned off and on again after setting.
f The output with the set resolution or vertical scanning frequency may not be possible depending on the computer or video device in use.
[SDI 输入]
Set this item in accordance with the signal input to the <SDI 输入> terminal.
Setting [RESOLUTION]
1)
Press as to select [SDI 输入].
2)
Press the <执行> button.
f The [SDI 输入] screen is displayed.
3)
Press as to select [RESOLUTION], and press the <执行> button.
f The [RESOLUTION] screen is displayed.
4)
Press as to select the item, and press the <执行> button.
f Select [AUTO], [720x480i], [720x576i], [1280x720p], [1920x1080i], [1920x1080p], [1920x1080sF], or
[2048x1080p].
Setting [3G-SDI MAPPING]
1)
Press as to select [SDI 输入].
2)
Press the <执行> button.
f The [SDI 输入] screen is displayed.
3)
Press as to select [3G-SDI MAPPING].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[LEVEL A]
[LEVEL B]
Note
f This item does not operate during SD-SDI or HD-SDI signal input.
Setting [SYSTEM SELECTOR]
1)
Press as to select [SDI 输入].
2)
Press the <执行> button.
f The [SDI 输入] screen is displayed.
3)
Press as to select [SYSTEM SELECTOR].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[RGB]
[YP
P
4:4:4]
B
R
[YP
P
4:2:2]
B
R
110 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically selects [LEVEL A] or [LEVEL B].
Fixes the mapping method to 3G-SDI Level-A.
Fixes the mapping method to 3G-SDI Level-B.
Automatically selects [RGB], [YP
[RGB], [YP
P
4:4:4], or [YP
B
R
B
the input signal. [RGB] is selected when the payload ID is not attached to the input signal.
Fixes to [RGB].
Fixes to [YP
P
4:4:4].
B
R
Fixes to [YP
P
4:2:2].
B
R
P
4:4:4], or [YP
P
4:2:2].
B
R
B
R
P
4:2:2] is automatically selected by reading the payload ID attached to
R
Advertisement
Table of Contents
