Table of Contents
Advertisement
When operating from the lens shift adjustment screen
1)
Press the <默认> button on the remote control while displaying the lens shift adjustment screen.
f The confirmation screen is displayed.
2)
Press qw to select [OK], and press the <执行> button.
f The projection lens is moved to the home position.
Note
f [PROGRESS] is displayed in the menu while the projection lens is moved to the home position.
f The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set
incorrectly. Change the setting if the type does not match the projection lens attached to the projector.
f The home position does not match with the optical image center position.
f The home position varies depending on the projection lens type. Refer to "Lens shift range" (x page 65) for details.
f The home position of the Fixed-focus Lens (Model No.: ET-DLE035C) may deviate from the designed position.
f You can also display the [HOME POSITION] screen by pressing the <镜头> button on the control panel or the <移位> button on the remote
control for at least three seconds.
Lens shift range
The projector can adjust the position of the projected image within the lens shift range for each projection lens
based on the position of the projected image in the home position (standard projection position).
Perform the lens shift adjustment within the range indicated in the following illustration. Note that moving the lens
outside the adjustment range may change the focus. This is because the shift of the lens is restricted to protect
the optical parts.
Following illustration indicates the lens shift range when the projector is installed on desk/floor.
Projection lens
Standard zoom lens, ET-DLE150C, ET-DLE250C,
Model No.
Standard projection position
Lens shift range
0.1 H
Projection lens
Model No.
Standard projection position
Lens shift range
0.1 H
Chapter 3 Basic Operations — Projecting
ET-DLE350C, ET-DLE450C
0.1 H
Projected image width H
Origin position of the lens mounter
ET-DLE085C, ET-DLE105C
Projected image width H
Origin position of the lens mounter
Standard projection position
0.3 H
0.1 H
Projected image width H
0.28 H
Origin position of the lens mounter
ET-DLE060C
0.19 H
Origin position of the lens mounter
ET-DLE035C
Standard projection position
ENGLISH - 65
Advertisement
Table of Contents
