[Lens] - Panasonic DPL PT-FRZ120C Operating Instructions (Functional Manual)

[CEILING]
Note
f Refer to "Angle sensor" (x page 30) for details on the range of the installation attitude that can be detected by the built-in angle sensor.

[LENS]

Perform the setting and operation regarding the projection lens.
[LENS TYPE]
When the projector is used for the first time or when the projection lens is replaced, confirm the [LENS TYPE]
setting. Change the setting if the type does not match the projection lens attached to the projector.
1) Press as to select [LENS].
2) Press the <执行> button.
f The [LENS] screen is displayed.
3) Press as to select [LENS TYPE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[ET-DLE035]
Note
f The projection lens is not moved to the correct home position when the [LENS TYPE] is set incorrectly.
[LENS HOME POSITION]
Operate in following procedure to move the projection lens to the home position.
1) Press as to select [LENS].
2) Press the <执行> button.
f The [LENS] screen is displayed.
3) Press as to select [LENS HOME POSITION].
4) Press the <执行> button.
f The confirmation screen is displayed.
5) Press qw to select [OK], and press the <执行> button.
f The projection lens is moved to the home position.
Note
f [PROGRESS] is displayed in the menu while the projection lens is moved to the home position.
f The projection lens is not moved to the correct home position when the [LENS TYPE] is set incorrectly. Change the setting if the type does
not match the projection lens attached to the projector.
f The home position does not match with the optical image center position.
f The home position varies depending on the projection lens type. Refer to "Lens shift range" (x page 65) for details.
f The home position of the Fixed-focus Lens (Model No.: ET-DLE035C) may deviate from the designed position.
f [LENS HOME POSITION] can also be executed by pressing the <默认> button on the remote control while the lens shift adjustment screen
is displayed.
[LENS CALIBRATION]
Detect the lens shift adjustment limit value, and perform the calibration in the adjustment range.
1) Press qw to select [LENS].
2) Press the <执行> button.
f The [LENS] screen is displayed.
120 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Select this item when installing the projector using the Ceiling Mount Bracket (optional).
Projected image is inverted upside down.
Select this item when a projection lens anything other than the Fixed-focus Lens (Model No.:
ET-DLE035C) is used for projection.
Select this item when the Fixed-focus Lens (Model No.: ET-DLE035C) is used for projection.