Table of Contents
Advertisement
Chapter 3 Basic Operations — Switching on/off the projector
Operation
Press w.
Press q.
7)
Press the <执行> button to proceed to the initial setting.
Interrelation of luminance and runtime
The projector can be operated at arbitrary brightness and duration of use by combining the settings of [MAX
LIGHT OUTPUT LEVEL] and [LIGHT OUTPUT].
Interrelation of luminance and runtime is as follows. Make the initial setting (operation setting) depending on your
desired duration of use and brightness of the projected image.
Values of the luminance and runtime are rough estimations.
f To set the projector based on the duration of use
Duration of use (hour)
20 000
24 000
27 000
31 000
35 000
40 000
f To set the projector based on luminance
Luminance (lm)
12 000
11 000
10 000
9 000
8 000
7 000
6 000
5 000
4 000
Note
f The runtime may be shorter than the estimation due to the influence of characteristics of each light source, conditions of use, installation
environment, etc.
f The duration of use is referred to as the runtime when you use the projector successively. The duration of use is an estimated duration and
is not the warranty period.
f The estimated runtime is a time for the luminance to decrease to half.
f If the consolidated runtime of the projector exceeds 20 000 hours, replacement of the components inside the projector may be required. The
consolidated runtime can be confirmed in the [STATUS] screen. Refer to the [PROJECTOR SETUP] menu → [STATUS] for details.
f After completed the initial setting, the wider the combination of luminance and runtime becomes by setting the [PROJECTOR SETUP]
menu → [BRIGHTNESS CONTROL] → [BRIGHTNESS CONTROL SETUP] → [CONSTANT MODE] to [AUTO] or [PC]. Refer to the
[PROJECTOR SETUP] menu → [BRIGHTNESS CONTROL] for details.
Brightness
The screen becomes brighter.
The screen becomes darker.
[MAX LIGHT OUTPUT LEVEL]
(%)
100.0
100.0
100.0
100.0
100.0
—
[MAX LIGHT OUTPUT LEVEL]
(%)
100.0
100.0
100.0
100.0
100.0
100.0
100.0
—
—
Adjustment
Runtime (estimate)
The runtime becomes shorter.
The runtime becomes longer.
[LIGHT OUTPUT] (%)
100.0
100.0
100.0
78.2
58.5
—
[LIGHT OUTPUT] (%)
100.0
91.7
83.3
75.0
66.7
58.3
50.0
—
—
Range of adjustment
8.0 % - 100.0 %
Luminance (lm)
12 000
12 000
12 000
9 300
7 000
—
Runtime (hour)
27 000
28 500
30 000
31 500
33 000
35 000
37 000
—
—
ENGLISH - 55
Advertisement
Table of Contents
