Table of Contents
Advertisement
Setting [BIT DEPTH]
1)
Press as to select [SDI 输入].
2)
Press the <执行> button.
f The [SDI 输入] screen is displayed.
3)
Press as to select [BIT DEPTH].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[12-bit]
[10-bit]
Setting [SIGNAL LEVEL]
1)
Press as to select [SDI 输入].
2)
Press the <执行> button.
f The [SDI 输入] screen is displayed.
3)
Press as to select [SIGNAL LEVEL].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[64-940]
[4-1019]
[ON-SCREEN DISPLAY]
Set the on-screen display.
Setting [OSD POSITION]
Set the position of the menu screen (OSD).
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <执行> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [OSD POSITION].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[1]
Setting [OSD ROTATION]
Set the orientation of the menu screen (OSD).
1)
Press as to select [ON-SCREEN DISPLAY].
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically selects [12-bit] or [10-bit].
Fixes to [12-bit].
Fixes to [10-bit].
Normally use this setting.
Select this item when gray is displayed as black.
Sets to the center left of the screen.
Sets to the bottom left of the screen.
Sets to the top center of the screen.
Sets to the center of the screen.
Sets to the bottom center of the screen.
Sets to the upper right of the screen.
Sets to the center right of the screen.
Sets to the bottom right of the screen.
Sets to the upper left of the screen.
ENGLISH - 111
Advertisement
Table of Contents
