Table of Contents
Advertisement
r [SLOT2 BUTTON]
[HDMI3 [SLOT2]] and [HDMI4 [SLOT2]] can be selected when the optional Interface Board for HDMI 2 input
(Model No.: ET-MDNHM10C) is installed in <SLOT 2>.
[DisplayPort3 [SLOT2]] and [DisplayPort4 [SLOT2]] can be selected when the optional Interface Board for
DisplayPort 2 input (Model No.: ET-MDNDP10C) is installed in <SLOT 2>.
[DVI-D3 [SLOT2]] and [DVI-D4 [SLOT2]] can be selected when the optional Interface Board for DVI-D 2 input
(Model No.: ET-MDNDV10C) is installed in <SLOT 2>.
The items from [SDI1 [SLOT2]] to [SDI4 [SLOT2]] can be selected when the optional Interface Board for 12G-SDI
(Model No.: ET-MDN12G10C) is installed in <SLOT 2>.
[SDI OPT1 [SLOT2]] and [SDI OPT2 [SLOT2]] can be selected when the optional Interface Board for 12G-SDI
Optical (Model No.: ET-MDNFB10) is installed in <SLOT 2>.
[TOGGLE]
[HDMI3 [SLOT2]]
[HDMI4 [SLOT2]]
[DisplayPort3 [SLOT2]]
[DisplayPort4 [SLOT2]]
[DVI-D3 [SLOT2]]
[DVI-D4 [SLOT2]]
[SDI1 [SLOT2]]
[SDI2 [SLOT2]]
[SDI3 [SLOT2]]
[SDI4 [SLOT2]]
[SDI OPT1 [SLOT2]]
[SDI OPT2 [SLOT2]]
[DISABLE]
[CONTROL DEVICE PASSWORD CHANGE]
The control device password can be changed.
1)
Press as to select [CONTROL DEVICE PASSWORD CHANGE].
2)
Press the <执行> button.
f The [CONTROL DEVICE PASSWORD CHANGE] screen is displayed.
3)
Press asqw to select the text, and press the <执行> button to enter the text.
4)
Press asqw to select [OK], and press the <执行> button.
f To cancel, select [CANCEL].
Attention
f The initial password is "AAAA" by the factory default setting, or after initialized by one of the following methods.
g When initialized by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g When initialized by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
f Change the password periodically that is hard to guess.
f To initialize your password, consult your distributor.
[BRIGHTNESS LIMITATION]
Set whether to start projection with the brightness limitation disabled when the power of the projector is turned on
next time.
1)
Press as to select [BRIGHTNESS LIMITATION].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
210 - ENGLISH
Chapter 4 Settings — [SECURITY] menu
Switches the input of the optional Interface Board installed in <SLOT 2> in turn when the button is
operated.
Fixes to selection operation of the HDMI3 input of the Interface Board.
Fixes to selection operation of the HDMI4 input of the Interface Board.
Fixes to selection operation of the DisplayPort3 input of the Interface Board.
Fixes to selection operation of the DisplayPort4 input of the Interface Board.
Fixes to selection operation of the DVI-D3 input of the Interface Board.
Fixes to selection operation of the DVI-D4 input of the Interface Board.
Fixes to selection operation of the SDI1 input of the Interface Board.
Fixes to selection operation of the SDI2 input of the Interface Board.
Fixes to selection operation of the SDI3 input of the Interface Board.
Fixes to selection operation of the SDI4 input of the Interface Board.
Fixes to selection operation of the SDI OPT1 input of the Interface Board.
Fixes to selection operation of the SDI OPT2 input of the Interface Board.
Disables button operations.
Advertisement
Table of Contents
