Table of Contents
Advertisement
Chapter 3 Basic Operations — Operating with the remote control
Operating with the remote control
Using the shutter function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible
to turn off the image temporarily.
button
1)
Press the <快门> button.
f The image disappears.
f This operation can be also performed using the <快门> button on the control panel.
2)
Press the <快门> button again.
f The image is displayed.
Note
f The power indicator <开（绿）/待机（红）> will blink slowly in green while the shutter function is in use (shutter: closed).
f The fade-in/fade-out time of the image can be set by the [DISPLAY OPTION] menu → [SHUTTER SETTING].
f If the shutter function is enabled (shutter: closed) while the [PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] →
[ACTIVE FOCUS] is set to [ON], the operation of the temperature detection correction of the active focus optimizer function will stop.
Using the on-screen display function
Turn off the on-screen display function (no display) when you do not wish the viewers to see the on-screen
display, such as the menu or the input terminal name.
button
1)
Press the <屏幕显示> button.
f Turns off (hides) the on-screen display.
2)
Press the <屏幕显示> button again.
f Cancels the hide condition of the on-screen display.
Note
f The hide condition of the on-screen display can also be canceled by pressing the <菜单> button on the control panel for at least three
seconds while the on-screen display is off (hidden).
68 - ENGLISH
Advertisement
Table of Contents
