Table of Contents
Advertisement
Maintenance and service
8.3 Maintenance
Cleaning guidelines
• Do not use solvents or corrosive or abrasive detergents.
• Use a mild, non-corrosive cleaning agent, e.g. dishwashing detergent, even if heavily
soiled.
• Use a wet cloth to clean the Wallbox outside and dry it.
• Deionized water is particularly suitable for cleaning the unit.
• Do not scrape off stubborn dirt using hard objects.
• Do not use any sharp-edged tools.
• Soften paper stickers in advance for easy removal.
• Make sure that water does not get underneath the cover of the charging socket or into the
charge coupling.
Clean the Wallbox according to agreed cycles to ensure optimum quality as well as
functionality.
NOTE
Use environmentally friendly cleaning agents approved for cleaning plastics (polycarbonate).
NOTE
Cleaning the interior of the Wallbox is not normally required for regular maintenance. Only
qualified personnel may clean the inside of the Wallbox if the situation demands, e.g. due to
a dusty environment.
8.3
Maintenance
NOTE
High currents flow over a long period of time when charging the electric vehicle. The
electrical installation of the Wallbox must be checked regularly to prevent overheating of
cables and resulting damage.
NOTE
Only qualified personnel trained for these activities may perform this work.
NOTE
Make sure that you add the required seals and lead seals.
The appendix contains the following lists:
• Installation and maintenance schedule (Page 75)
68
VersiCharge AC Wallbox Operating Instructions ERK
Operating Instructions, 08/2023, A5E51549696-AC
Advertisement
Table of Contents
Troubleshooting
