Closing The Wallbox - Siemens VersiCharge 8EM1310-F.0 Series Operating Instructions Manual

Mounting / Installing / Connecting

4.9 Closing the Wallbox

4.9 Closing the Wallbox
1. Place the cover over the electronic modules and fasten it with flexible clips
2. Attach the protective cover for the electronics again (not in illustration). Check that the
seal is sitting correctly. Make sure that the cables are not pinched or bent when hooking
the Wallbox into the wall bracket. Lift the Wallbox from the wiring position and close the
Wallbox by placing the Wallbox onto the wall bracket. Secure the Wallbox against
unauthorized opening with the supplied M3x8 screw. Tighten the screw hand-tight.
42
VersiCharge AC Wallbox Operating Instructions ERK
Operating Instructions, 08/2023, A5E51549696-AC