Safety During Setup, Installation And Maintenance - Siemens VersiCharge 8EM1390 A0 Series Installation Instructions Manual

Mounting on column
Table of Contents

Advertisement

Storage conditions
Store the charging station in a clean indoor area. The storage location must meet the
following conditions:
• Horizontal surfaces
• Protection against mechanical stress (e.g. due to shocks, vibrations)
• Free of dust
• Low-pollutant atmosphere
• Room temperature as constant as possible
• Permissible relative humidity: 5% to 70% (no condensation)
2.2

Safety during setup, installation and maintenance

To avoid any danger, only qualified personnel may set up and mount the Wallbox. The
Wallbox must be in a deenergized state. Follow the installation and assembly instructions
provided. Observe the applicable regional standards and regulations, such as the five safety
rules (see also The five safety rules for electrical work (Page 12)). Failure to follow safety
instructions may result in hazardous situations that could cause death or serious injury.
Safety at the work site
When working on roads, construction sites and in public areas, ensure safety in line with local
requirements and regulations.
Observe the applicable guidelines and directives for proper implementation:
• Legal specifications
• On-site safety requirements
• Road traffic conditions
Note the following:
• Secure the working area in accordance with the "Guidelines for the safety of workstations
on roads" or similar regional regulations.
• Use appropriate cordoning equipment where necessary.
• Always wear a safety vest when working in the area of road traffic.
• Ensure sufficient free workspace with a diameter of at least 8 meters.
• Comply with the valid building regulations for parking spaces for electric cars including
the Wallbox.
Risk of accident in limited workspace
Leave sufficient clearance to surrounding obstacles to avoid collisions and crushing when
setting up the Wallbox.
There must be no objects on the ground in the working area to rule out the risk of tripping.
VersiCharge Column Mounting
Hardware Installation Manual, 06/2022, A5E51460654-AB
2.2 Safety during setup, installation and maintenance
Safety instructions
11

Advertisement

Table of Contents
loading

Table of Contents