Mounting the wall bracket
1. Remove the wall bracket from the Wallbox.
Figure 4-1 Removing the wall bracket
2. Align the wall bracket to the mounting surface using a spirit level. Use the wall bracket to
mark the mounting holes.
Figure 4-2 Drill picture
3. Put the wall bracket to one side and drill the holes in the wall.
4. Insert the dowels in the drilled holes.
5. Drive the dowels into the wall with the hammer until the dowels are flush with the wall.
VersiCharge AC Wallbox Operating Instructions ERK
Operating Instructions, 08/2023, A5E51549696-AC
Mounting / Installing / Connecting
4.3 Assembly procedure
31