Table of Contents
Advertisement
Password
Assign a secure password during commissioning to protect the Wallbox against unauthorized
access.
To do this, follow the current recommendations for security in the information technology
when selecting the password.
2.7
Safety-relevant symbols
Symbols for the Wallbox
The following table explains icons than may be located on your product, on its packaging, or
in the accompanying documentation.
Symbol
Meaning
General warning sign Caution/Notice
You must read the product documentation. The product documentation contains information about
the type of potential hazard and helps to recognize risks and implement countermeasures.
ISO 7000 No. 0434B, DIN ISO 7000 No. 0434B
Read the information provided in the product documentation.
ISO 7010 M002
Ensure the device is only installed by an electrically skilled person.
IEC 60417 No. 6182
Adhere to the values for the mechanical load of the device.
Note that connected mains lines must be designed according to the expected minimum and maxim
um ambient temperature.
Ensure that the device is set up and connected in compliance with EMC requirements.
Note that when the device is live, it must not be installed or removed and cables must not be plugged
or pulled.
Note that a device may be exposed to electrical voltages which can be dangerous.
ANSI Z535.2
Do not dispose of the old device with household waste. Follow local, national, and international regu
lations for disposal.
The EN 17186 standard specifies the marking for charging stations for charging electric vehicles and
also defines the technical design and size of the new markings. You can find additional information
on the EN 17186 standard the following table.
VersiCharge AC Wallbox Operating Instructions ERK
Operating Instructions, 08/2023, A5E51549696-AC
Safety information
2.7 Safety-relevant symbols
15
Advertisement
Table of Contents
Troubleshooting
