Charging - Siemens VersiCharge 8EM1310-F.0 Series Operating Instructions Manual

Operation

6.2 Charging

6.2 Charging
Safety instructions during the charging process
Risk of electric shock and fire
Touching live parts may cause electric shock or even death. Defective connectors or cables
may cause fire.
• Do not kink or squeeze the charging cable. Do not draw the charging cable over sharp
• Do not use the Wallbox if dangerous damage or tampering is visible. Inform the operator.
• Grip the charge coupling to pull the charging cable out of the socket. Do not grip by the
• Never touch the charge coupling with wet hands.
• Do not connect or disconnect any cables during a thunderstorm.
Risk of overheating and fire
Using unauthorized accessories increases the risk of fire due to overheating.
• Only use a charging cable approved for the vehicle.
• Do not use an extension for the connection between the Wallbox and the vehicle.
• Adapter and adapter cable are not permitted.
Risk of accident
Ensure that the charging cable does not block any escape route or constitute a tripping
hazard. In this case, the cable becomes an obstacle that can lead to injuries. The cable could
also be ripped out from the anchoring and cause damage to the vehicle or the Wallbox.
Basic procedure
Connect the vehicle and the Wallbox using a suitable cable. For a Wallbox with permanently
connected cable, plug the charge coupling into the vehicle plug of the electric vehicle. After
successful authentication, the charging process is started automatically by the vehicle and
displayed via the Status LED. You have the option of preselecting a time delay and viewing
the status via the Sifinity Go App. After the charging process ends, the device switches to
"Ready" status (LED display (Page 20)).
58
DANGER
edges or hot surfaces.
Keep yourself and other persons away from the Wallbox.
cable itself.
DANGER
CAUTION
VersiCharge AC Wallbox Operating Instructions ERK
Operating Instructions, 08/2023, A5E51549696-AC