Siemens VersiCharge 8EM1310-F.0 Series Operating Instructions Manual page 30

Mounting / Installing / Connecting
4.3 Assembly procedure
Risk of accident
Risk of accident through a non-secured Wallbox.
• Do not put the Wallbox down unattended.
• Place or lay down the Wallbox and its parts in such a way that the Wallbox and its parts
Risk of accident
Risk of accident in limited space. Leave sufficient clearance to surrounding obstacles to avoid
collisions and crushing when setting up the Wallbox.
• Ensure that there is sufficient clearance to the surrounding obstacles when setting the
• Keep the working area free of objects to avoid the risk of tripping.
Preparing the assembly
1. Check the prerequisites in the chapter Preparations for mounting (Page 29).
2. Carefully open the packaging.
3. Provide a base for setting the Wallbox down.
4. Carefully remove the Wallbox from the packaging.
5. Check the Wallbox for damage. Complaints filed after installation will not be accepted.
6. Check the package content (Page 21)
Risk of electric shock due to exposed electrical connections and components
Before starting the installation work, check that the supply cable has been disconnected
from the mains and secured against restart.
If damage or tampering is visible (e.g. on the enclosure, socket), do not operate the Wallbox.
30
WARNING
cannot tip over or fall down.
WARNING
load down.
DANGER
VersiCharge AC Wallbox Operating Instructions ERK
Operating Instructions, 08/2023, A5E51549696-AC