Video Composite Signal Setting - Furuno MU-152HD Operator's Manual

2.2

Video Composite Signal Setting

You can adjust the VIDEO signal from the VIDEO port. The VIDEO signal is also displayed in the
PIP window.
1. Select the signal to adjust at the DISP selection window.
2. Press the MENU key to show the menu.
3. Press the  or  key to select [VIDEO].
4. Press the  or  key to select the menu item to set.
5. Press the  or  key to adjust the setting.
6. Press the MENU key to close the menu.
Menu item
PIP_SIZE Adjusts the size of picture-in-picture window.
Note: This setting is available when the PIP
window is displayed.
CONTRAST Increases or decreases the contrast level.
R_LEVEL Adjusts the red color level.
G_LEVEL Adjusts the green color level.
B_LEVEL Adjusts the blue color level.
TEMPERATURE Adjusts the color temperature.
B STRETCH Emphasizes the black color.
W STRETCH Emphasizes the white color.
(Refer to "RGB/DVI /HDMI menu descriptions" on page 19.)
RGB DVI HDMI VIDEO OSD SYSTEM
PIP_SIZE 5 (1~10)
CONTRAST 32 (1~64)
R_LEVEL 31 (1~64)
G_LEVEL 31 (1~64)
B_LEVEL 31 (1~64)
TEMPERATURE 7000K (5500K/6500K/7000K/8000K)
B STRETCH OFF (OFF, 1~10)
W STRETCH OFF (OFF, 1~10)
[VIDEO] setting menu
VIDEO menu descriptions
Function
20
2. ADJUSTMENTS
Setting
1 (47 mm x 31 mm) to
10 (235 mm x 160 mm)
1 to 64
1 to 64
1 to 64
1 to 64
5500K, 6500K, 7000K,
8000K
OFF, 1 to 10
OFF, 1 to 10