Video Composite Signal Setting (For Non-Solas) - Furuno MU-231 Operator's Manual

2. ADJUSTMENTS
2.3 Video Composite Signal Setting (For Non-SO-
LAS)
You can adjust the VIDEO signal from the VIDEO port. The VIDEO signal is also displayed in the
PIP window (see section 3.5).
1. Select the signal to adjust at the DISP selection window.
2. Press the MENU key to show the menu.
3. Press the  or  key to select [VIDEO].
RGB
PIP_SIZE
CONTRAST
R_LEVEL
G_LEVEL
B_LEVEL
TEMPERATURE
B STRETCH
W STRETCH
4. Press the  or  key to select the menu item to adjust.
5. Press the  or  key to adjust the setting.
6. Press the MENU key to close the menu.
Menu item
PIP_SIZE Adjust the size of the picture-in-picture window.
Note: This setting is available when the PIP window is dis-
played.
CONTRAST Adjust the contrast level.
 (darken),  (brighten)
R_LEVEL Adjust the red color level.
 (weaken),  (strengthen)
G_LEVEL Adjust the green color level.
 (weaken),  (strengthen)
B_LEVEL Adjust the blue color level.
 (weaken),  (strengthen)
TEMPERATURE Adjust the color temperature.
 (strengthen the red color level),
 (strengthen the blue color level)
B STRETCH Emphasize the black color.
[OFF] (standard),  (weaken),  (strengthen)
W STRETCH Emphasize the white color.
[OFF] (standard),  (weaken),  (strengthen)
DVI1 DVI2 VIDEO OSD
5 (1~10)
32 (1~64)
128 (1~256)
128 (1~256)
128 (1~256)
7000K (5000K~9300K)
OFF (OFF, 1~10)
OFF (OFF, 1~10)
[VIDEO] menu descriptions
Function
16
SYSTEM
Setting
1 (62 mm x 42
mm) to 10 (340
mm x 232 mm)
1 to 64
1 to 256
1 to 256
1 to 256
5000 to 9300K
(Step is 100.)
[OFF], 1 to 10
[OFF], 1 to 10