Video Composite Signal Setting (For Non-Solas) - Furuno MU-190 Operator's Manual

2.3 Video Composite Signal Setting (For Non-SO-
LAS)
You can adjust the VIDEO signal from the VIDEO port. The VIDEO signal is also displayed in the
PIP window (see section 3.5).
1. Select the signal to adjust at the DISP selection window.
2. Press the MENU key to show the menu.
3. Press the or
4. Press the or
5. Press the or
6. Press the MENU key to close the menu.
Menu item
PIP_SIZE Adjust the size of the picture-in-picture window.
Note: This setting is available when the PIP window is dis-
played.
CONTRAST Adjust the contrast level.
R_LEVEL Adjust the red color level.
G_LEVEL Adjust the green color level.
B_LEVEL Adjust the blue color level.
TEMPERATURE Adjust the color temperature.
B STRETCH Emphasize the black color.
[OFF] (standard),
W STRETCH Emphasize the white color.
[OFF] (standard),
key to select [VIDEO].
RGB DVI1 DVI2 VIDEO
PIP_SIZE 5 (1~10)
CONTRAST 32 (1~64)
R_LEVEL 128 (1~256)
G_LEVEL 128 (1~256)
B_LEVEL 128 (1~256)
TEMPERATURE 7000K (5000K~9300K)
B STRETCH OFF (OFF, 1~10)
W STRETCH OFF (OFF, 1~10)
key to select the menu item to adjust.
key to adjust the setting.
[VIDEO] menu descriptions
(darken), (brighten)
(weaken), (strengthen)
(weaken), (strengthen)
(weaken), (strengthen)
(strengthen the red color level),
(strengthen the blue color level)
(weaken),
(weaken),
OSD SYSTEM
Function
(strengthen)
(strengthen)
16
2. ADJUSTMENTS
Setting
1 (52 mm x 35
mm) to 10 (285
mm x 194 mm)
1 to 64
1 to 256
1 to 256
1 to 256
5000 to 9300K
(Step is 100.)
[OFF], 1 to 10
[OFF], 1 to 10