Furuno MU-152HD Operator's Manual page 28

2. ADJUSTMENTS
5. Press the  or  key to adjust the setting.
6. Press the MENU key to close the menu.
Menu item
H_SIZE Adjusts the image size horizontally.
Horizontal size:  (narrow),  (wide)
V_SIZE Adjusts the image size vertically.
Vertical size:  (narrow),  (wide)
PHASE** Adjusts the sample timing so that the flicker disappears and
the text is clear.
CONTRAST Increases or decreases the contrast level.
 (darken),  (brighten)
H_POSITION Moves the image position horizontally.
 (leftward),  (rightward)
V_POSITION Moves the image position vertically.
 (upward),  (downward)
R_LEVEL Adjusts the red color level.
 (weaken),  (strengthen)
G_LEVEL Adjusts the green color level.
 (weaken),  (strengthen)
B_LEVEL Adjusts the blue color level.
 (weaken),  (strengthen)
TEMPERATURE Adjusts the color temperature.
5500K (the most reddish), 8000K (the most bluish)
B STRETCH Emphasizes the black color.
[OFF] (standard),  (weaken),  (strengthen)
W STRETCH Emphasizes the white color.
[OFF] (standard),  (weaken),  (strengthen)
DISP MODE* Selects the displaying method.
[FULL]: Shows the input signal on entire screen.
[NORMAL]: Shows the input signal with original aspect ratio.
SHARPNESS** Sharpens the edge horizontally.
 (soften characters and lines),  (sharpens characters
and lines)
*: When inputting SXGA, a circle may be displayed as an ellipse because the aspect ratio differs.
In this case, select [NORMAL] from the [DISP MODE] menu item on the [RGB], [DVI], or [HDMI]
menus. The right and left on the screen are left blank, but this is normal.
**: If the characters are not clear, adjust [PHASE] and [SHARPNESS].
RGB/DVI /HDMI menu descriptions
Function
19
Setting
Depending on in-
put signal
1 to 32
1 to 64
1 to 99 (RGB),
1 to 50 (DVI, HD-
MI)
1 to 40
1 to 64
1 to 64
1 to 64
5500K, 6500K,
7000K, 8000K
OFF, 1 to 10
OFF, 1 to 10
FULL, NORMAL
1 to 10