Video Composite Signal Setting - Furuno Mu-190HD Operator's Manual

2.2

Video Composite Signal Setting

You can adjust the VIDEO1, 2 or 3 signal from the VIDEO1, VIDEO2 and VIDEO3 ports separate-
ly. The VIDEO1, 2 or 3 signal is displayed in the PIP window also.
1. Select the signal to adjust at the DISP selection window.
2. Press the MENU key to show the menu.
3. Press the or
The same items are contained on [VIDEO1], [VIDEO2] and [VIDEO3] setting menus.
4. Press the or
5. Press the or
6. Press the MENU key to close the menu.
Menu item
PIP_SIZE Adjusts the size of picture-in-picture window.
Note: This setting is available when the PIP
window is displayed.
CONTRAST Increases or decreases the contrast level.
R_LEVEL Adjusts the red color level.
G_LEVEL Adjusts the green color level.
B_LEVEL Adjusts the blue color level.
TEMPERATURE Adjusts the color temperature.
B STRETCH Emphasizes the black color.
W STRETCH Emphasizes the white color.
(Refer to "RGB/DVI menu descriptions" on page 17.)
key to select [VIDEO1], [VIDEO2] or [VIDEO3].
RGB DVI1 DVI2 VIDEO1
PIP_SIZE
CONTRAST
R_LEVEL
G_LEVEL
B_LEVEL
TEMPERATURE 7000K
B STRETCH OFF
W STRETCH OFF
[VIDEO1] (2 or 3) setting menu
key to select the menu item to set.
key to adjust the setting.
VIDEO menu descriptions
Function
VIDEO2 VIDEO3 OSD SYSTEM
5 (1~10)
32 (1~64)
31 (1~64)
31 (1~64)
31 (1~64)
(5500K/6500K/7000K/8000K)
(OFF, 1~10)
(OFF, 1~10)
18
2. ADJUSTMENTS
Setting
1 (52 mm x 35 mm) to
10 (285 mm x 194 mm)
1 to 64
1 to 64
1 to 64
1 to 64
5500K, 6500K, 7000K,
8000K
OFF, 1 to 10
OFF, 1 to 10