• This manual is intended for use by native speakers of English. • FURUNO will assume no responsiblity for the damage caused by improper use or modification of the equipment or claims of loss of profit by a third party.
Page 4
Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO CAUTION agent for service. Ground the equipment to prevent mutual interference.
A Word to the Owner of the MU-151C FURUNO Electric Company thanks you for purchasing the MU-151C 15” Multi-Purpose LCD Display. We are confident you will discover why the FURUNO name has become synonymous with quality and reliability. For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for quality and reliability throughout the world.
FR-1500 MK3 series FCV-1200L/LM FCV-1500L GD-280/380/680 CH-250 CH-270 CSH-5L/8L CI-68/88 *: VGA: 640x480 dot, XGA: 1024x768 dot Note: Portrait orientation equipment cannot be connected to the MU-151C. Note: There are two ports for video signal, but they cannot be used simultaneously.
EQUIPMENT LISTS Standard supply Name Type Code No. Remarks DC specification LCD Display Unit MU-151C − AC specification SP19-00101 001-403-170 For DC Spare Parts* 1 set SP06-01301 001-403-800 For AC For DC CP19-00100 000-012-630 (MJ-A3SPF0025-035) Installation Materials* 1 set CP06-01400...
1 MOUNTING Refer to the outline drawing at the end of this manual for mounting dimensions. Note: The surface of the LCD monitor is made of glass. Handle it with care. 1.1 Display Unit The display unit may be mounted on a desktop or flush mounted in a panel. When selecting a mounting location, keep in mind the following points: •...
Flush mounting See the outline drawing at the end of this manual for mounting dimensions. CAUTION Hold the hard cover and display unit together when lifting the display unit. The display unit may fall if only the hard cover is held. 1.
Desktop mounting The display unit with hanger can be mounted on a desktop. If you purchased the unit without hanger, order the optional hanger kit (Type: FP19-00900, Code No.: 001-410-540). Contents of hanger kit Name Type Code No. Hanger FP19-00901 001-410-550 Knob bolt FP03-09204...
Page 12
Hood (option) When it is too bright in the daytime, use the optional hood kit (Type: FP06-01301, Code No.: 001-403-820) to shade the screen. Contents of hood kit Name Type Code No. Hood 06-024-2402 100-320-460 Fixing plate 06-024-2403 100-320-471 Cosmetic screw M3x6 000-150-356 Upset screw...
2 WIRING 2.1 Wiring Connect equipment to the MU-151C by referring to the drawings in this section and the interconnection diagram at the back of this manual. A cable with a connector at both ends is provided to connect equipment.
Page 14
This allows the cable to be passed through a hole having a diameter of 30 mm. • Cable 06S4078 is of waterproof construction, however, the rear panel of the MU-151C is not waterproof (specification IP20). Therefore, remove rubber cover and fixing metal from the display unit side of the cable.
3 ADJUSTMENTS 3.1 Menu Settings The menu contains items for adjustment of the display. 1. Press the [MENU] key to show the menu. 2. Choose XGA or VGA at “Resolution” at the top of the menu depending on the equipment connected (see page iv).
Page 16
Contents of menu item Menu item Function Available range Increases or decreases contrast level. Contrast 0-255 Adjusts the gain value of RGB together. H Total Adjusts the image size horizontally. 0-127 If the setting value is inappropriate too much, nothing may appear on the screen. Phase Adjusts the characters and graphic lines.
Page 17
AutoAdjust 1. Operate the external equipment connected to the MU-151C to show the frame test pattern. Refer to each manual for how to show the test pattern. AutoAdjust is inoperative if the frame test pattern is not available. In this case, adjust the timing manually.
Adjust the display brilliance on low brilliance. DIP switch Setting value • Usually the MU-151C is operated on default setting (setting value of the DIP switch is indeterminate). • The default brilliance with the brilliance control 1 (second lowest setting) is 0.3 cd/m •...
4 OPERATION Arrow keys Power key MENU Brill key Key/LED Function Turns the power on/off. Adjusts the display brilliance (lowest: 0, highest: 10). -: Decreases the display brilliance. +: Increases the display brilliance. MENU Opens/closes the main menu. Escapes from current screen. Arrow keys (▲)(▼) Selects menu items.
5 MAINTENANCE, TROUBLESHOOTING WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment. Only qualified personnel should work inside the equipment. 5.1 Maintenance Routine maintenance Regular maintenance is important for good performance. Check the following on a regular basis to keep the equipment in good operating condition. •...
Check battery voltage. Fuse has blown. Replace fuse (AC: on the rear of the display unit, DC: in the power cable). Cable between MU-151C and external Refasten cable. equipment has loosened. Power cable has loosened. Refasten cable. The brilliance is too low.