Video Composite Signal Setting - Furuno MU-152 Operator's Manual

2. ADJUSTMENTS
2.2

Video Composite Signal Setting

You can adjust the VIDEO1, 2 or 3 signal from the VIDEO1, VIDEO2 and VIDEO3 ports separate-
ly. The VIDEO1, 2 or 3 signal is also displayed in the PIP window (see section 3.5).
1. Select the signal to adjust at the DISP selection window (see section 3.4).
2. Press the MENU key to show the menu.
3. Press the or
and [VIDEO3] menus show the same menu items.
4. Press the or
5. Press the or
6. Press the MENU key to close the menu.
Menu item
[PIP_SIZE]
[CONTRAST]
[R_LEVEL]
[G_LEVEL]
[B_LEVEL]
[TEMPERATURE]
[B STRETCH]
[W STRETCH]
key to select [VIDEO1], [VIDEO2] or [VIDEO3]. The [VIDEO1], [VIDEO2]
RGB DVI1 DVI2 VIDEO1
PIP_SIZE
CONTRAST
R_LEVEL
G_LEVEL
B_LEVEL
TEMPERATURE 7000K
B STRETCH OFF
W STRETCH OFF
key to select the menu item to adjust.
key to adjust the setting.
[VIDEO1/2/3] menu descriptions
Function
Adjusts the size of the picture-in-picture window.
Note: This setting is available when the PIP window
is displayed.
Adjusts the contrast level.
(darken), (brighten)
Adjusts the red color level.
(weaken), (strengthen)
Adjusts the green color level.
(weaken), (strengthen)
Adjusts the blue color level.
(weaken), (strengthen)
Adjusts the color temperature.
[5500K] (the most reddish), [8000K] (the most bluish)
Emphasizes the black color.
[OFF] (standard), (weaken),
Emphasizes the white color.
[OFF] (standard), (weaken),
VIDEO2 VIDEO3 OSD SYSTEM
5 (1~10)
32 (1~64)
31 (1~64)
31 (1~64)
31 (1~64)
(5500K/6500K/7000K/8000K)
(OFF, 1~10)
(OFF, 1~10)
(strengthen)
(strengthen)
14
Setting
1 (47 mm×31 mm) to
10 (235 mm×160 mm)
1 to 64
1 to 64
1 to 64
1 to 64
5500K, 6500K,
7000K, 8000K
[OFF], 1 to 10
[OFF], 1 to 10