Other Commands - Delta A6000 User Manual

USER MANUAL
A6000
AC POWER SOURCE
[SOURce:]SYNThesis:PHASe
Function
Example
Parameter : <NR2>,...,<NR2> , effective range: 0.0~359.9
Parameter returns: <NR2>,...,<NR2>

6.11.4 Other Commands

Followings are other commands instruction, example and returned parameter:
TRIG
Function
Example
Parameter : OFF | ON
Parameter returns: OFF | RUNNING
NPHase
Function
Example
Parameter : SINGLE | THREE.SYN
Parameter returns: SINGLE | THREE.SYN
Note: It needs 800msec to make this command take effect, please reserve delay
time to make sure operation normally.
VERion:DSP?
Function
Example
Parameter returns: S00E00
VERion:LCM?
Function
Example
Parameter returns: S00E00
94 │ www.deltaww.com
: Set (query) phase for each order of harmonic waveforms.
: [SOURce:]SYNThesis:PHASe?
[SOURce:]SYNThesis:PHASe 100.5 20.8 60.5 77.8
: Set (query) trigger status. Disabled when OUTPut:MODE = FIXE
: TRIG?
TRIG ON
: Set output mode:
SINGLE: SINGLE: Outputs in parallel

THREE.SYN: Outputs in series

: NPHase?
NPHase SINGLE
: Query firmware version.
: VERion:DSP?
: Query firmware version used for LCM.
: VERion:LCM?
Query output mode
set output as single phase