Table of Contents
Advertisement
USER MANUAL
A6000
AC POWER SOURCE
2. Rotate knob to change <300V> to <150V>, then press
3.11 Voltage Sense
Voltage Sense determine output voltage measurement point is at AC output terminal
(Vout) or input terminal at product under testing (Vsense). If it is set at Vsense, Remote
Sense wire must be connected first, otherwise compensate error will occur. AC source will
compensate the voltage drop of the output cable if Vsense is selected.
Following processes demonstrate how to set Volage Sense as Remote Sense:
1. Press
32
│ www.deltaww.com
or
to move cursor to Voltage Sense
to confirm setting
Advertisement
Table of Contents
