USER MANUAL
A6000
AC POWER SOURCE
4. Applications
4.1 Introduction
Other than stable AC voltage, DME-A602ABS SERIES also provide three kinds
programmable dynamic output. Following paragraphs explain the definition of parameters
and how to do the setting:
LIST mode: Let user to set 10 sets of user-defined voltage, frequency. Can make 10
different outputs consecutively.
PULSE mode: Simulate repeatedly changed output voltage.
STEP mode: Simulate gradually changed output voltage.
DME-A602ABS SERIES also provide 39 orders of amplitude and phase angle settings
for user to make self-defined waveforms. It can be used at all output modes once the self-
defined waveforms is created.
4.2 LIST Mode
1. At advanced parameter setting page, press
56
│ www.deltaww.com
to select LIST